Many commercial buildings that are very large in size require ample amount of cooling. These buildings can effectively utilize the water chillers. The chiller manufacturers India produce cost effective chillers. Also, as there are no refrigerant pipes everywhere in the building, many hazards can be easily avoided. There are many benefits of chilling plants in India. Here are some of them listed.
Chilling plants India produce the chillers that work very effectively. It is all about pumping the cold water in major parts of the building. The air is cooled using the chillers and then it is moved to the spaces with the help of the terminal devices. These terminal devices are located inside the building. The transfer can also take place with the help of the coils. These coils can be found in the unit that handles air. The temperature control is also quite effective. It is made possible with the help of the automatic valves. In several big buildings, the heat that gets absorbed by water is thrown out into the air outside. This is done using the cooling tower.
Basically, the chilled water system functions to carry the cooling fluid. It carries it from the chillers directly to the load terminal. It is then carried back to the chillers. This helps in maintaining the comfort of the space. Remember that water used in the chillers is the secondary refrigerant. Therefore, there is a need to make sure that the heat is removed from the water. Chiller takes care of this part. Water is then carried through the different components from where it absorbs the heat and throws it out. The chilling plants India manufacture high-quality chillers that can carry out these tasks quite effectively.
Return piping and supply both are used in the chilled systems and that too in the closed circuit. This makes sure that they are protected from the outside atmosphere. This is another benefit of the chilling plants in India. The chillers do not require a high level of chemical procedures to control the corrosion and contamination. The mechanism is rather simple. First of all, chiller cools the water. The water is then transferred to the cooling coils. It is also called heat exchanger. This is where the air is cooled when the energy is absorbed. Once the water is warm, it is transferred back to the chiller. This means the same process keeps on repeating. When the water is being cooled inside the chillers, the energy which it has absorbed is transferred using the refrigeration cycle. This energy is then released in the outer atmosphere of the building.
Another huge benefit of using water is that it comes with a particular heart valve, it is non-corrosive, it is cost-effective, and is also non-toxic. This is the reason why it is a great choice, especially when compared to the other refrigerants such as propylene glycols, methanol, sodium chloride brines, or glycerine. There is another very big advantage. The chillers that are water cooled are much more durable than the chillers that are air cooled. The reason is pretty simple. The air-based chillers need to be installed out of the building. On the other hand, the chillers that are cooled using water are installed within the building.